How to disable the management Ethernet ports on the SRX services gateway

SUMMARY:

This article provides information on how to disable the management port (fxp0) on SRX 1000, 3000, and 5000 series service gateway.

PROBLEM OR GOAL:

This is applicable to the following Junos platforms.

  • SRX1400
  • SRX3400
  • SRX3600
  • SRX5600
  • SRX5800

On the above list of SRX devices, a dedicated port is present for Out of Band management. If this management port is not connected (physically down), it triggers a major alarm:

Some customers choose not to use this management port. Then they will receive a system alarm, as mentioned above.

CAUSE:

SOLUTION:

Junos has the provision to manually disable the management ports using the following command.

The above command will also work for a chassis cluster environment.
An alternative method for doing this in a chassis cluster environment is given below:

To verify, check the alarms again.

PURPOSE:

Configuration
Implementation
Troubleshooting

Sevebilirsin...

Bir Cevap Yazın

E-posta hesabınız yayımlanmayacak. Gerekli alanlar * ile işaretlenmişlerdir